Factory Price Diesel Genset Cummins/Perkins/Mtu/Mitsubishi/Sme 2000kw 2250kVA 2500kVA 2750kVA 3000kVA 3750kVA 3000kw Standby Electric Power Generator

• Customization: Available
• After-sales Service: Responsible
• Warranty: 12 Months/1000 Hours Maintenance
• Model NO.: MC
• Type: Self-Starting Diesel Generator
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Low Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Automation Type
• Excitation Mode: Static Exciter
• Engine Brand: Mitsubishi/Sme/Mtu/Baudouin, Optional
• Alternator Brand: Stamford/Leroy Somer/Marathon/Mecca, Optional
• Control Panel: Deepsea/Comap/Deif/Smartgen, Optional
• Frequency(Hz): 50Hz/60Hz, 1500rpm 1800rpm
• Voltage Output: 230/400V, 220-480V
• Medium High Voltage: 3.3kv-13.8kv Generator
• Canopy Type: Silent Sound Proof/Containerized/Open
• Power Generators: Prime Power/Standby Power/Continues Operation
• Accessory: Tool Kit, General Introduction Manual
• Governing Type: Mech./Elec.
• Service Coverage: Global Service
• Certificate Available: CE, ISO, OEM Authorization etc.
• Application: Data Center/Building/Power Plant/Construction
• Electric Generator: Diesel Generator Sets
• Large Power Generator: Mtu 2500kVA Generator
• Transport Package: Both Standard Marine Packing or Compact Packing.
• Specification: As below Spec. with details
• Trademark: Mecca
• Origin: China
• HS Code: 85021
• Production Capacity: 1000/Year
• Package Size: 410.00cm * 181.00cm * 213.00cm
• Package Gross Weight: 6100.000kg

Product Description

, as part of a Global Power Supplier initiative, provides a professional solution for the design, application and after-sales support of generators.

Strongly focused on innovation and the inherent flexibility of product design, Mecca Power has been successful in global markets with a broad and diverse range of genset power products that can operate autonomously or independently. parallel, on-site or remotely controlled.

With more than 10 years of experience in manufacturing and exporting energy products, the Mecca team will advise you on product choices. 

Product Description

Specification

Powered by  MTU                                                                                                                              50HZ  220-440 V   500-3300KVA
Model	LTP		PRP		Engine		Fuel Cons.	Cyl.	Disp.	Gov.
	KVA / KW		KVA/KW		Model	Origin	L/H(100%)		L
MC500M	500	400	450	360	10V1600G10F	DE	101.3	10V	17.5	ADEC
MC550M	550	440	500	400	10V1600G20F	DE	110.9	10V	17.5	ADEC
MC660M	660	528	600	480	12V1600G10F	DE	131.7	12V	21	ADEC
MC725M	725	580	660	528	12V1600G20F	DE	144.9	12V	21	ADEC
MC880M	880	704	800	640	12V2000G65	CN	184.0	12V	23.9	ADEC
MC1000M	1000	800	900	720	16V2000G25	CN	210.0	16V	31.8	ADEC
MC1100M	1100	880	1000	800	16V2000G65	CN	230.8	16V	31.8	ADEC
MC1250M	1250	1000	1125	900	18V2000G65	CN	264.5	16V	31.8	ADEC
MC1375M	1375	1100	1250	1000	18V2000G26F	CN	261.1	18V	35.8	ADEC
MC1500M	1500	1200	1350	1080	12V4000G23R	DE	307.6	12V	57.2	ADEC
MC1650M	1650	1320	1500	1200	12V4000G23	DE	351.5	12V	57.2	ADEC
MC1800M	1800	1440	1625	1300	12V4000G23	DE	351.5	12V	57.2	ADEC
MC2000M	2000	1600	1812	1450	12V4000G63	DE	398.2	12V	57.2	ADEC
MC2250M	2250	1800	2050	1640	16V4000G23	DE	452.1	16V	76.3	ADEC
MC2500M	2500	2000	2250	1800	16V4000G63	DE	491.6	16V	76.3	ADEC
MC2750M	2750	2200	2500	2000	20V4000G23	DE	561.8	20V	95.4	ADEC
MC3000M	3000	2400	2750	2200	20V4000G63	DE	611.6	20V	95.4	ADEC
MC3300M	3300	2640	3000	2400	20V4000G63L	DE	651.2	20V	95.4	ADEC

Powered by  MTU                                                                                                                            60HZ  220-480V  625-4000KVA
Model	LTP		PRP		Engine		Fuel Cons.	Cyl.	Disp.	Gov.	Dimention	Weight
	KVA / KW		KVA/KW		Model	Origin	L/H(100%)		L		L*W*H (MM)	KGS
MC625M	625	500	563	450	10V1600G20S	DE	114.1	10V	17.5	ADEC	3225*1485*2070	3870
MC688M	688	550	625	500	12V1600G10S	DE	135.5	12V	21	ADEC	3387*1531*2140	4890
MC750M	750	600	688	550	12V1600G20S	DE	145.2	12V	21	ADEC	3387*1531*2140	3784
MC875M	875	700	800	640	12V2000G45	CN	179.6	12V	23.9	ADEC	4100*1810*2130	6100
MC1000M	1000	800	900	720	12V2000G85	CN	196.9	12V	23.9	ADEC	4100*1810*2130	6900
MC1125M	1125	900	1025	820	16V2000G45	CN	219.2	16V	31.8	ADEC	4495*2122*2295	7000
MC1250M	1250	1000	1138	910	16V2000G85	CN	240.8	16V	31.8	ADEC	4495*2122*2295	7150
MC1500M	1500	1200	1375	1100	18V2000G85	CN	281.1	18V	35.8	ADEC	4840*1825*2165	8200
MC2000M	2000	1600	1819	1455	12V4000G43	DE	348.2	12V	57.2	ADEC	6150*2150*2500	12500
MC2200M	2200	1760	2000	1600	12V4000G83	DE	405.7	12V	57.2	ADEC	6350*2150*2500	13000
MC2500M	2500	2000	2250	1800	16V4000G43	DE	469.8	16V	76.3	ADEC	7085*2250*2500	14500
MC2875M	2875	2300	2625	2100	16V4000G83	DE	535.5	16V	76.3	ADEC	7085*2250*2500	15000
MC3125M	3125	2500	2875	2300	20V4000G43	DE	598.8	20V	95.4	ADEC	7160*2555*2930	20500
MC3438M	3438	2750	3125	2500	20V4000G83	DE	651.7	20V	95.4	ADEC	7160*2555*2930	21000
MC4000M	4000	3200	3637.5	2910	20V4000G83L	DE	693.9	20V	95.4	ADEC	7160*2555*2930	21000

Genset Workshop

FAQ

1.Q: What is your MOQ of this item?
A:1 Set

2.Q: What are your payment terms?
A:30% TT as deposit,70% TT before Shipment or 100% LC at sight

3.Q:What's the warranty time of diesel generators?
A:Global Warranty: 12months after delivery or 1000 running hours, whichever come first.

4.Q:Can you accept the customized products?
A:Yes, of course.We accept your specific order if you can provide us your special requirements or special samples

5.Q:What's the delivery time ?
A:20 to 35 days after receiving your payment in advance.

6.Q:Do you offer OEM service?
A: Yes

7.Q:What is the power range do you have?
A:Mecca Power assemble genset from 2 to 4000kva

8.Q:What's your special compare to other manufacturer?
A:We can delivery genset 1000units/month as engine and alternator OEM and Strategic partners. Especially for big quantity and big power projects, we support not only by solutions and tender documents, but also by fast delivery time and good price.

-----------------------------------------------------------------------------------------------MAITAINENCE---------------------------------------------------------------------------------------------

General Troubleshooting            

This section lists the generating set for some common fault, the reasons for the failure and determines the            
method of fault. General operators can determine their own fault and note, maintenance it according to the            
brochure. But please contact the repairing agents when meeting a special note or not listed failure of operation.            
Please remember the following suggestions before repairing:            
- Make sure that study the failure carefully before any operation.            
- Repair with the easiest way and most commonly used method.            
- Find the exact causes of failure and completely solve the fault.      
     
1. Generator Sets            
Description of this section is for reference only. If the following failure occurs please contact the repairing agents.            
(Some models of control panel installed only parts of the following warning indicator light)

Icon	Indicator Light	Reason	Fault Analysis
Low oil pressure alarm	Low oil pressure alarm	When oil pressure does not reduce normally, the light is on.	-General because of a lack of oil or lubrication system failure caused by (refueling or replacing the oil filter) -When occurs this fault should automatically shutdown generator sets immediately.
High water temperature alarm	High water temperature alarm	When the water temperature has risen to a level higher than or equal to the sensor setting, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Low fuel level alarm	Low fuel level alarm	When a fuel level has been detected by the sensor fitted to the daily tank, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Battery charger fault alarm	Battery charger fault alarm	If the charging system has fault, when engine running, the light is off.	-Battery charging system fault caused. -The light is on at the initial start, when the charger reaches a certain speed, the light is off. -This failure will not lead to automatic shutdown generating units.
Crank failure alarm	Crank failure alarm	When the generator set failed three times (or six times) in a row starting, the light is on.	-Oil supply system or re-start the system failure caused.
Overload or breaker tripping alarm	Overload or breaker tripping alarm	When overloading or Short circuit, the light is on. Tripping circuit breakers cause generator set load out.	-In this fault, it need to load or unload some parts to eliminate short-circuit, and then re-close the circuit breaker.

Introduction of Maintenance grade(Interval) for the generator set 
A Level Maintenance Interval (Daily Maintenance)
1. Check Daily Report of Genset .
2. Check fuel level and coolant level. 
3. Check alternator for cracks or other damage, and the condition of the belts must be checked, flab or 
other damage.
4. Check the Air filter. The air filter should be replaced when necessary .
5. Release fuel tank and fuel filter's water and sediment.
6. Check the water cooling filter.
7. Check starting battery and electrolyte, add electrolyte when necessary. 
8. Check the starter, check noisy defect.
9. Use air syringe cleaner to clean the water tank, coolant system and cooled fin net.
B Level Maintenance Interval (Less than 400 hours)
1. Repeatedly check A Level Daily Maintenance steps.
2. After operating 100 to 250 hours, replace the fuel filter. All the fuel filters should not be cleaned, it 
should be replaced. 100 to 250 hours is just flexible time, actually it must be according to the practice 
and real fact. 
3. After operating 200 to 250 hours, replace the oil & oil filter. All the lube oil must fit up to the CF 
Grade of American Petroleum Institute.
4. After operating 300 to 400 hours, replace the air filter. The air filter can be cleaned with air syringe, or 
it can be replaced. The replacement must be according to the environment and real fact.
5. Replace the cooling system and add coolant concentration.
6. Clean the crankshaft and inlet, outlet air- filter net. 
C Level Maintenance Interval (2000-3000 hours), Please do as follows:
1. Repeatedly check A and B Level Daily Maintenance steps.
2. Remove the tap of valve, clean and wash oil dirt and sludge.
3. Fasten snails from each part (including running parts and fixed parts)
4. Clean and wash the crankcase, oil sludge, steel scraps and sediment with engine.
5. Check wearing of the engine turbo, clean and wash accumulation of carbon, adjust it when necessary.
6. Check and adjust valve clearance.
7. Check PT pump, quality of injection, adjust injection process, adjust it when necessary.
8. Check and adjust the tension of fan belt and water pump belt, adjust and replace it when necessary; 
clean and wash water tank radiator fins, then check the using capability of thermostat.
Current Repair (D Level Maintenance)(3000-4000 hours)
1. Check valve, valve seat and other wearing, repair or change it when necessary.
2. Check P pump, quality of injection, repair and adjust it when necessary.
3. Check and adjust connecting rod and fastening twisting torque.
4. Check and adjust valve clearance.
5. Check the trip of injector.
6. Check and adjust tension of fan and generating belt.
7. Clean and wash accumulation of carbon in inlet pipes.
8. Clean and wash the core of air cooler.
9. Clean and wash the whole oil lubrication system.
10. Clean and wash room of rocker arm, oil sludge in the sump and Metal scrap-iron.
Medium Repair (6000-8000 hours)
1. Including the items of minor repair.
2. Disassemble generator(except crankshaft)
3. Check the easy worn spare parts in pitman shaft system, gas distribution system, lubrication system, 
cooling system of cylinder, Piston, Intake and exhaust valve, replace them when necessary.
4. Check fuel supplying system, adjust oil pump and injector.
5. Repair and test the alternator, clean oil-sediment and lubricate the bearing of alternator.
Overhaul (9000-15000hours)
1. Including the items of intermediate repair.
2. Disassemble all the parts in the generator.
3. Replace cylinder, piston, piston loop, big and small bearing bushes, trusting pad of crankshaft, intake 
and exhaust valve, a whole set of tools for generator repair 
4. Adjust oil pump, injector and replace pump core, injector
5. Replace a whole set of repair tools for turbo charger and a repair set for water pump.
6. Adjust the parts of connecting rod, crankshaft and generator body,repair or replace them when necessary