China Factory Price 200kVA 300kVA 350kVA Cummins Silent Diesel Electric Generator with Leroy Somer/Stam Ford Alternator

• Customization: Available
• After-sales Service: Responsible
• Warranty: 12 Months/1000 Hours Maintenance
• Model NO.: MC
• Type: Basic Diesel Generator
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Low Noise
• Excitation Mode: Static Exciter
• Engine Brand: Cummins
• Alternator Brand: Mecca Power, Leroy Somer, Stam Ford
• Control Panel: Deepsea/Comap/Datakom/Delixi/Smartgen and Others
• Color: Optional
• Canopy Type: Silent Sound Proof/Weather Proof/Anti-Rusted Proof
• Frequency(Hz): 50Hz/60Hz
• Voltage Output: 220-440V
• Application: Telecom/Backup/Retal/Power Plant/Hospital
• Silent Power Generator: Generator Set 500kVA
• Accessory: Tool Kit, General Introduction Manual
• Governing Type: Mech./Elec.
• 200kVA Diesel Generator: China Diesel Generator
• Certificate Available: CE, ISO, OEM Authorization etc.
• Canopy Silent Generator: Power Unit
• Diesel Backup Generator: Diesel Electric Generator
• Transport Package: Both Standard Marine Packing or Compact Packing.
• Specification: As below Spec. with details
• Trademark: Mecca
• Origin: China
• HS Code: 85021100
• Production Capacity: 1000/Year

Product Description

Company Profile

Mecca Power, as part of a Global Power Supplier initiative, provides a professional solution for the design, application and after-sales support of generators.

Strongly focused on innovation and the inherent flexibility of product design, Mecca Power has been successful in global markets with a broad and diverse range of genset power products that can operate autonomously or independently. parallel, on-site or remotely controlled.

With more than 10 years of experience in manufacturing and exporting energy products, the Mecca team will advise you on product choices. 

Generator Introduction

1.Powered by Cummins engine
2.Leroy Somer/Stam ford/MECC ALTE alternator
3.Set mounted control panel with DSE/Smartgen controller
4.With base Fuel Tank of generating set
5.12/24V maintenance-free battery with battery charger and battery switch.

Specification

Powered by DCEC CUMMINS Series                                                                       50HZ   220-440 V 22-550KVA
Model	LTP		PRP		Engine		Fuel Cons.L/H	Cylinder	Displacement	Gov.	Dimention L*W*H (MM)	Weight (KGS)
	KVA / KW		KVA/KW		Model	Origin	100%		L		Open	Open
MC22C	22	17.6	20	16	4B3.9-G11	CN	5.7	4L	3.9	M	1860*750*1350	700
MC30C	30	24	28	22	4B3.9-G1	CN	7.1	4L	3.9	M	1860*750*1350	700
MC30C	30	24	28	22	4B3.9-G2	CN	6.7	4L	3.9	E	1860*750*1350	700
MC33C	33	26	30	24	4B3.9-G12	CN	7.4	4L	3.9	E	1950*750*1350	780
MC44C	44	35	40	32	4BT3.9-G1	CN	10.0	4L	3.9	M	1950*750*1350	780
MC44C	44	35	40	32	4BT3.9-G2	CN	9.3	4L	3.9	E	1950*750*1350	780
MC55C	55	44	50	40	4BTA3.9-G2	CN	12.9	4L	3.9	E	1950*850*1370	830
MC63C	63	50	56	45	4BTA3.9-G2	CN	12.9	4L	3.9	E	2220*850*1370	910
MC88C	88	70	80	64	4BTA3.9-G11	CN	17.6	4L	3.9	E	1850*930*1370	1050
MC105C	105	84	95	76	4BTA3.9-G13	CN	18.8	4L	3.9	E	2070*930*1500	1120
MC110C	110	88	100	80	4BTA3.9-G13	CN	24.7	4L	3.9	E	2070*930*1500	1120
MC103C	103	82	94	75	6BT5.9-G1	CN	21.7	6L	5.9	M	2130*985*1450	1200
MC103C	103	82	94	75	6BT5.9-G2	CN	24.2	6L	5.9	E	2130*985*1450	1200
MC115C	115	92	105	84	6BT5.9-G2	CN	24.2	6L	5.9	E	2130*985*1450	1200
MC125C	125	100	115	92	6BTA5.9-G2	CN	31.0	6L	5.9	E	2180*985*1450	1265
MC145C	145	116	135	108	6BTAA5.9-G2	CN	34.0	6L	5.9	E	2250*785*1460	1265
MC165C	165	132	150	120	6BTAA5.9-G12	CN	34.0	6L	5.9	E	2360*915*1500	1370
MC200C	200	160	180	145	6CTA8.3-G1	CN	42.0	6L	8.3	M	2350*1020*1550	1750
MC200C	200	160	180	145	6CTA8.3-G2	CN	42.0	6L	8.3	E	2350*1020*1550	1750
MC215C	215	172	200	160	6CTAA8.3-G2	CN	45.0	6L	8.3	E	2430*1015*1650	1750
MC250C	250	200	NA	NA	6CTAA8.3-G9	CN	NA	6L	8.3	E	2430*1015*1650	1750
MC264C	264	211	250	200	6LTAA8.9-G2	CN	53.0	6L	8.9	E	2620*1080*1760	2170
MC275C	275	220	250	200	6LTAA8.9-G3	CN	54.0	6L	8.9	E	2620*1080*1760	2170
MC300C	300	240	270	216	6LTAA9.5-G3	CN	58.0	6L	9.5	E	2840*1120*1800	2400
MC350C	350	280	320	256	6LTAA9.5-G1	CN	70.0	6L	9.5	E	2840*1120*1800	2510
MC425C	425	340	388	310	6ZTAA13-G3	CN	76.5	6L	13.0	E	3100*1360*2090	3280
MC475C	475	380	438	350	6ZTAA13-G2	CN	89.1	6L	13.0	E	3130*1360*2120	3330
MC475C	475	380	438	350	6ZTAA13-G4	CN	91.4	6L	13.0	E	3130*1360*2120	3330
MC468C	468	375	438	350	QSZ13-G2	CN	88.8	6L	13.0	ECU	3120*1370*2110	3300
MC500C	500	400	450	360	QSZ13-G5	CN	93.2	6L	13.0	ECU	3200*1260*2210	3300
MC500C	500	400	475	380	QSZ13-G3	CN	101.0	6L	13.0	ECU	3200*1370*2150	3530
MC550C	550	440	500	400	QSZ13-G10	CN	107	6L	13.0	ECU	3260*1370*2150	3530
StageIII
MC66C	66	53	60	48	QSB3.9-G2	CN	18	4L	3.9	ECU	2070*750*1400	875
MC88C	88	70	80	64	QSB3.9-G3	CN	20.1	4L	3.9	ECU	2130*750*1400	1020
MC110C	110	88	100	80	QSB5.9-G2	CN	26	6L	5.9	ECU	2450*890*1500	1210
MC138C	138	110	125	100	QSB5.9-G3	CN	31	6L	5.9	ECU	2500*890*1500	1210
MC165C	165	132	150	120	QSB6.7-G3	CN	38	6L	6.7	ECU	2470*1120*1700	1580
MC198C	198	158	180	144	QSB6.7-G4	CN	43	6L	6.7	ECU	2520*1120*1700	1610
MC220C	220	176	200	160	QSL8.9-G2	CN	55	6L	8.9	ECU	2600*1120*1780	2000
MC248C	248	198	225	180	QSL8.9-G3	CN	57	6L	8.9	ECU	2600*1120*1780	2000
MC275C	275	220	250	200	QSL8.9-G4	CN	60	6L	8.9	ECU	2800*1120*1780	2200
MC395C	395	316	360	288	QSZ13-G6	CN	81.6	6L	13.0	ECU	3070*1260*2210	3140
MC438C	438	350	400	320	QSZ13-G7	CN	89.2	6L	13.0	ECU	3160*1260*2210	3300

Genset Workshop

-----------------------------------------------------------------------------------------------MAITAINENCE---------------------------------------------------------------------------------------------

General Troubleshooting            

This section lists the generating set for some common fault, the reasons for the failure and determines the            
method of fault. General operators can determine their own fault and note, maintenance it according to the            
brochure. But please contact the repairing agents when meeting a special note or not listed failure of operation.            
Please remember the following suggestions before repairing:            
- Make sure that study the failure carefully before any operation.            
- Repair with the easiest way and most commonly used method.            
- Find the exact causes of failure and completely solve the fault.      
     
1. Generator Sets            
Description of this section is for reference only. If the following failure occurs please contact the repairing agents.            
(Some models of control panel installed only parts of the following warning indicator light)

Icon	Indicator Light	Reason	Fault Analysis
Low oil pressure alarm	Low oil pressure alarm	When oil pressure does not reduce normally, the light is on.	-General because of a lack of oil or lubrication system failure caused by (refueling or replacing the oil filter) -When occurs this fault should automatically shutdown generator sets immediately.
High water temperature alarm	High water temperature alarm	When the water temperature has risen to a level higher than or equal to the sensor setting, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Low fuel level alarm	Low fuel level alarm	When a fuel level has been detected by the sensor fitted to the daily tank, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Battery charger fault alarm	Battery charger fault alarm	If the charging system has fault, when engine running, the light is off.	-Battery charging system fault caused. -The light is on at the initial start, when the charger reaches a certain speed, the light is off. -This failure will not lead to automatic shutdown generating units.
Crank failure alarm	Crank failure alarm	When the generator set failed three times (or six times) in a row starting, the light is on.	-Oil supply system or re-start the system failure caused.
Overload or breaker tripping alarm	Overload or breaker tripping alarm	When overloading or Short circuit, the light is on. Tripping circuit breakers cause generator set load out.	-In this fault, it need to load or unload some parts to eliminate short-circuit, and then re-close the circuit breaker.

Introduction of Maintenance grade(Interval) for the generator set 
A Level Maintenance Interval (Daily Maintenance)
1. Check Daily Report of Genset .
2. Check fuel level and coolant level. 
3. Check alternator for cracks or other damage, and the condition of the belts must be checked, flab or 
other damage.
4. Check the Air filter. The air filter should be replaced when necessary .
5. Release fuel tank and fuel filter's water and sediment.
6. Check the water cooling filter.
7. Check starting battery and electrolyte, add electrolyte when necessary. 
8. Check the starter, check noisy defect.
9. Use air syringe cleaner to clean the water tank, coolant system and cooled fin net.
B Level Maintenance Interval (Less than 400 hours)
1. Repeatedly check A Level Daily Maintenance steps.
2. After operating 100 to 250 hours, replace the fuel filter. All the fuel filters should not be cleaned, it 
should be replaced. 100 to 250 hours is just flexible time, actually it must be according to the practice 
and real fact. 
3. After operating 200 to 250 hours, replace the oil & oil filter. All the lube oil must fit up to the CF 
Grade of American Petroleum Institute.
4. After operating 300 to 400 hours, replace the air filter. The air filter can be cleaned with air syringe, or 
it can be replaced. The replacement must be according to the environment and real fact.
5. Replace the cooling system and add coolant concentration.
6. Clean the crankshaft and inlet, outlet air- filter net. 
C Level Maintenance Interval (2000-3000 hours), Please do as follows:
1. Repeatedly check A and B Level Daily Maintenance steps.
2. Remove the tap of valve, clean and wash oil dirt and sludge.
3. Fasten snails from each part (including running parts and fixed parts)
4. Clean and wash the crankcase, oil sludge, steel scraps and sediment with engine.
5. Check wearing of the engine turbo, clean and wash accumulation of carbon, adjust it when necessary.
6. Check and adjust valve clearance.
7. Check PT pump, quality of injection, adjust injection process, adjust it when necessary.
8. Check and adjust the tension of fan belt and water pump belt, adjust and replace it when necessary; 
clean and wash water tank radiator fins, then check the using capability of thermostat.
Current Repair (D Level Maintenance)(3000-4000 hours)
1. Check valve, valve seat and other wearing, repair or change it when necessary.
2. Check P pump, quality of injection, repair and adjust it when necessary.
3. Check and adjust connecting rod and fastening twisting torque.
4. Check and adjust valve clearance.
5. Check the trip of injector.
6. Check and adjust tension of fan and generating belt.
7. Clean and wash accumulation of carbon in inlet pipes.
8. Clean and wash the core of air cooler.
9. Clean and wash the whole oil lubrication system.
10. Clean and wash room of rocker arm, oil sludge in the sump and Metal scrap-iron.
Medium Repair (6000-8000 hours)
1. Including the items of minor repair.
2. Disassemble generator(except crankshaft)
3. Check the easy worn spare parts in pitman shaft system, gas distribution system, lubrication system, 
cooling system of cylinder, Piston, Intake and exhaust valve, replace them when necessary.
4. Check fuel supplying system, adjust oil pump and injector.
5. Repair and test the alternator, clean oil-sediment and lubricate the bearing of alternator.
Overhaul (9000-15000hours)
1. Including the items of intermediate repair.
2. Disassemble all the parts in the generator.
3. Replace cylinder, piston, piston loop, big and small bearing bushes, trusting pad of crankshaft, intake 
and exhaust valve, a whole set of tools for generator repair 
4. Adjust oil pump, injector and replace pump core, injector
5. Replace a whole set of repair tools for turbo charger and a repair set for water pump.
6. Adjust the parts of connecting rod, crankshaft and generator body,repair or replace them when necessary