China Factory 400kw 450kw 500kw Silent Genset Weichai Yuchai Sdec Engine Diesel Backup Power Generator

• After-sales Service: Responsible
• Warranty: 12 Months/1000 Hours Maintenance
• Type: Basic Diesel Generator
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: MC
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Low Noise
• Excitation Mode: AC Rotating Exciter
• Frequency: 50/60 Hz
• Engine: Chinese Engine
• Alternator: Leroy Somer, Mecca, Stamford, Optional
• Controller: UK Deepsea, Smartgen, Optional
• Phase: 3 Phase Diesel Generator
• Application: Factory/Construction/Building/Hospital
• Power Generation: Diesel Generator Sets
• Diesel Powered Generator: Diesel Engine Generator
• Soundless Generator: Diesel Standby Power Generator
• Quiet Diesel Generator: Diesel Backup Generator
• Dg Set: 500kVA Dg Generator
• Diesel Electric Generator: 400kw Diesel Generator
• Silent Genset: 500kw Diesel Generator
• Super Silent Diesel Generator: Ultrasilent/Soundproof Generator
• Mobile/Moveable Generator: Trailer Mounted Generator
• Transport Package: Standard Export Package
• Specification: As following Specs
• Trademark: Mecca
• Origin: China
• HS Code: 85021100
• Production Capacity: 5000/Year
• Package Size: 3600.00cm * 1350.00cm * 1900.00cm
• Package Gross Weight: 3420.000kg

Product Description

as part of a Global Power Supplier initiative, provides a professional solution for the design, application and after-sales support of generators. Strongly focused on innovation and the inherent flexibility of product design, Mecca Power has been successful in global markets with a broad and diverse range of genset power products that can operate autonomously or independently. parallel, on-site or remotely controlled.

 

Product Description

 

As a prestigious OEM, we maintain a sound relationship with our main material suppliers, such as Deutz, Man, Doosan, Stamford, Leroy Somer, Mecc Alte, Deepsea, ComAp, etc. 
 
Strongly focused on innovation and technical service, Mecca Power has been successfully used in hundreds of projects, widely applied in buildings, constructions, Telecom, data centers, mining,  etc., covering over 90 countries in Asia, Africa, Oceania, Europe, Middle East and America. 
 
With over 10 years of experience in manufacturing and exporting energy products, the Mecca team will provide you full-service solutions. 

Specification

Powered by YUCHAI                                                                      50HZ   220-440V  22-3575KVA
Model	LTP		PRP		Engine		Gov.
	KVA / KW		KVA/KW		Model	Origin
MC22YC	22	18	20	16	YCV2.5N35-G20	CN	E
MC33YC	33	26	30	24	YCV2.5T45-G20	CN	E
MC41YC	41	33	38	30	YCV2.5T55-G20	CN	E
MC44YC	44	35	40	32	YCD4.2N60-G20	CN	E
MC69YC	69	55	63	50	YCD4.2T90-G20	CN	E
MC88YC	88	70	80	64	YCA4.8T110-G20	CN	E
MC110YC	110	88	100	80	YCA4.8TAA140-G20	CN	E
MC138YC	138	110	125	100	YCA4.8TAA180-G20	CN	E
MC138YC	138	110	125	100	YCB6.9TAA180-G20	CN	E
MC165YC	165	132	150	120	YCB6.9TAA205-G20	CN	E
MC206YC	206	165	188	150	YCA7.3TAA245-G20	CN	E
MC220YC	220	176	200	160	YCQ7.5260-G30	CN	E
MC275YC	275	220	250	200	YCMK10TAA350-G20	CN	E
MC344YC	344	275	313	250	YCMK10TAA420-G20	CN	E
MC413YC	413	330	375	300	YCMJ12TAA500-G20	CN	E
MC440YC	440	352	400	320	YCMJ12540-G30	CN	ECM
MC495YC	495	396	450	360	YCT16TAA600-G20	CN	E
MC550YC	550	440	500	400	YCT16TAA660-G20	CN	E
MC550YC	550	440	500	400	YCT16660-G31	CN	ECM
MC619YC	619	495	563	450	YCTD20780-G31	CN	ECM
MC688YC	688	550	625	500	YCTD20840-G31	CN	ECM
MC756YC	756	605	688	550	YCTD20900-G31	CN	ECM
MC825YC	825	660	750	600	YCTD201000-G30	CN	ECM
MC880YC	880	704	800	640	YCTH281070-G31	CN	ECM
MC990YC	990	792	900	720	YCTH281220-G31	CN	ECM
MC1100YC	1100	880	1000	800	YCTH281320-G31	CN	ECM
MC1100YC	1100	880	1000	800	YCC401320-G31	CN	ECM
MC1238YC	1238	990	1125	900	YCC401520-G31	CN	ECM
MC1375YC	1375	1100	1250	1000	YCTD40TA1680-G30	CN	ECM
MC1500YC	1500	1200	1375	1100	YCTD40TA1830-G30	CN	ECM
MC1650YC	1650	1320	1500	1200	YCTD40TA2000-G30	CN	ECM
MC1875YC	1875	1500	1688	1350	YCTD52TA2270-G30	CN	ECM
MC2000YC	2000	1600	1875	1500	YCTD52TA2510-G30	CN	ECM
MC2200YC	2200	1760	2000	1600	YCTD52TA2700-G30	CN	ECM
MC2250YC	2250	1800	2125	1700	YCC80TA2700-G31	CN	ECM
MC2500YC	2500	2000	2250	1800	YCC80TA3000-G30	CN	ECM
MC2500YC	2500	2000	2250	1800	YCC105TA3000-G31	CN	ECM
MC2750YC	2750	2200	2500	2000	YCC105TA3300-G31	CN	ECM
MC3000YC	3000	2400	2750	2200	YCC105TA3600-G31	CN	ECM
MC3250YC	3250	2600	3000	2400	YCC105TA4000-G31	CN	ECM
MC3250YC	3250	2600	3000	2400	YCC105TA4200-G30	CN	ECM
MC3575YC	3575	2860	3250	2600	YCC105TA4500-G30	CN	ECM

Genset Workshop

FAQ

1.Q: What is your MOQ of this item?
A:1 Set

2.Q: What are your payment terms?
A:30% TT as deposit,70% TT before Shipment or 100% LC at sight

3.Q:What's the warranty time of diesel generators?
A:Global Warranty: 12months after delivery or 1000 running hours, whichever come first.

4.Q:Can you accept the customized products?
A:Yes, of course.We accept your specific order if you can provide us your special requirements or special samples

5.Q:What's the delivery time ?
A:20 to 35 days after receiving your payment in advance.

6.Q:Do you offer OEM service?
A: Yes

7.Q:What is the power range do you have?
A:Mecca Power assemble genset from 2 to 4000kva

8.Q:What's your special compare to other manufacturer?
A:We can delivery genset 1000units/month as engine and alternator OEM and Strategic partners. Especially for big quantity and big power projects, we support not only by solutions and tender documents, but also by fast delivery time and good price.

-----------------------------------------------------------------------------------------------MAINTENANCE---------------------------------------------------------------------------------------------

General Troubleshooting            

This section lists the generating set for some common fault, the reasons for the failure and determines the            
method of fault. General operators can determine their own fault and note, maintenance it according to the            
brochure. But please contact the repairing agents when meeting a special note or not listed failure of operation.            
Please remember the following suggestions before repairing:            
- Make sure that study the failure carefully before any operation.            
- Repair with the easiest way and most commonly used method.            
- Find the exact causes of failure and completely solve the fault.      
     
1. Generator Sets            
Description of this section is for reference only. If the following failure occurs please contact the repairing agents.            
(Some models of control panel installed only parts of the following warning indicator light)

Icon	Indicator Light	Reason	Fault Analysis
Low oil pressure alarm	Low oil pressure alarm	When oil pressure does not reduce normally, the light is on.	-General because of a lack of oil or lubrication system failure caused by (refueling or replacing the oil filter) -When occurs this fault should automatically shutdown generator sets immediately.
High water temperature alarm	High water temperature alarm	When the water temperature has risen to a level higher than or equal to the sensor setting, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Low fuel level alarm	Low fuel level alarm	When a fuel level has been detected by the sensor fitted to the daily tank, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Battery charger fault alarm	Battery charger fault alarm	If the charging system has fault, when engine running, the light is off.	-Battery charging system fault caused. -The light is on at the initial start, when the charger reaches a certain speed, the light is off. -This failure will not lead to automatic shutdown generating units.
Crank failure alarm	Crank failure alarm	When the generator set failed three times (or six times) in a row starting, the light is on.	-Oil supply system or re-start the system failure caused.
Overload or breaker tripping alarm	Overload or breaker tripping alarm	When overloading or Short circuit, the light is on. Tripping circuit breakers cause generator set load out.	-In this fault, it need to load or unload some parts to eliminate short-circuit, and then re-close the circuit breaker.

Introduction of Maintenance grade(Interval) for the generator set 
A Level Maintenance Interval (Daily Maintenance)
1. Check Daily Report of Genset .
2. Check fuel level and coolant level. 
3. Check alternator for cracks or other damage, and the condition of the belts must be checked, flab or 
other damage.
4. Check the Air filter. The air filter should be replaced when necessary .
5. Release fuel tank and fuel filter's water and sediment.
6. Check the water cooling filter.
7. Check starting battery and electrolyte, add electrolyte when necessary. 
8. Check the starter, check noisy defect.
9. Use air syringe cleaner to clean the water tank, coolant system and cooled fin net.
B Level Maintenance Interval (Less than 400 hours)
1. Repeatedly check A Level Daily Maintenance steps.
2. After operating 100 to 250 hours, replace the fuel filter. All the fuel filters should not be cleaned, it 
should be replaced. 100 to 250 hours is just flexible time, actually it must be according to the practice 
and real fact. 
3. After operating 200 to 250 hours, replace the oil & oil filter. All the lube oil must fit up to the CF 
Grade of American Petroleum Institute.
4. After operating 300 to 400 hours, replace the air filter. The air filter can be cleaned with air syringe, or 
it can be replaced. The replacement must be according to the environment and real fact.
5. Replace the cooling system and add coolant concentration.
6. Clean the crankshaft and inlet, outlet air- filter net. 
C Level Maintenance Interval (2000-3000 hours), Please do as follows:
1. Repeatedly check A and B Level Daily Maintenance steps.
2. Remove the tap of valve, clean and wash oil dirt and sludge.
3. Fasten snails from each part (including running parts and fixed parts)
4. Clean and wash the crankcase, oil sludge, steel scraps and sediment with engine.
5. Check wearing of the engine turbo, clean and wash accumulation of carbon, adjust it when necessary.
6. Check and adjust valve clearance.
7. Check PT pump, quality of injection, adjust injection process, adjust it when necessary.
8. Check and adjust the tension of fan belt and water pump belt, adjust and replace it when necessary; 
clean and wash water tank radiator fins, then check the using capability of thermostat.
Current Repair (D Level Maintenance)(3000-4000 hours)
1. Check valve, valve seat and other wearing, repair or change it when necessary.
2. Check P pump, quality of injection, repair and adjust it when necessary.
3. Check and adjust connecting rod and fastening twisting torque.
4. Check and adjust valve clearance.
5. Check the trip of injector.
6. Check and adjust tension of fan and generating belt.
7. Clean and wash accumulation of carbon in inlet pipes.
8. Clean and wash the core of air cooler.
9. Clean and wash the whole oil lubrication system.
10. Clean and wash room of rocker arm, oil sludge in the sump and Metal scrap-iron.
Medium Repair (6000-8000 hours)
1. Including the items of minor repair.
2. Disassemble generator(except crankshaft)
3. Check the easy worn spare parts in pitman shaft system, gas distribution system, lubrication system, 
cooling system of cylinder, Piston, Intake and exhaust valve, replace them when necessary.
4. Check fuel supplying system, adjust oil pump and injector.
5. Repair and test the alternator, clean oil-sediment and lubricate the bearing of alternator.
Overhaul (9000-15000hours)
1. Including the items of intermediate repair.
2. Disassemble all the parts in the generator.
3. Replace cylinder, piston, piston loop, big and small bearing bushes, trusting pad of crankshaft, intake 
and exhaust valve, a whole set of tools for generator repair 
4. Adjust oil pump, injector and replace pump core, injector
5. Replace a whole set of repair tools for turbo charger and a repair set for water pump.
6. Adjust the parts of connecting rod, crankshaft and generator body,repair or replace them when necessary