DCP 1800kw 2250kVA Data Center Diesel Generator with Shanghai Mitsubishi Sme S16r2-Ptaw-C Engine

• Customization: Available
• After-sales Service: Responsible
• Warranty: 12 Months or 1000 Operation Hours
• Model NO.: MC
• Type: Self-Starting Diesel Generator
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Low Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Automation Type
• Excitation Mode: Static Exciter
• Engine Brand: Mitsubishi/Sme
• Alternator Brand: Stamford/Leroy Somer/Marathon/Mecca, Optional
• Control Panel: Deepsea/Comap/Deif/Smartgen and Others
• Cylinders: 4-20 Cylinders
• Canopy Type: Silent Sound Proof/Weather Proof/Anti-Rusted Proof
• Frequency(Hz): 50Hz/60Hz
• Voltage Output: 220-440V, 110-480V
• Application: Hospital/Construction/Building/Data Center
• Application[a]: Power Plant/Factory/Mining/Retal
• Accessory[a]: Spare Part Document
• Governing Type: Mech/Elec/ECU/Ecm/Adec/Hpcr
• Service Coverage: Global Service
• Certificate Available: CE, ISO, OEM Authorization etc.
• 2500kVA Standby Generator: 2000kw Container Generator
• Industrial Diesel Generator Set: Power Generating Sets
• Transport Package: Both Standard Marine Packing or Compact Packing.
• Specification: As below Spec. with details
• Trademark: Mecca
• Origin: China
• HS Code: 850211
• Production Capacity: 1000/Year
• Package Size: 679.00cm * 220.00cm * 252.00cm
• Package Gross Weight: 16400.000kg

Product Description

Company Profile

, with self-owned factory assets, independent R&D team, complete infrastructure equipment, provides a professional solution for the design, production and application support of intelligent generator sets with a broad and diverse range of gen-set power products that can operate independently, paralleled, on-site or remotely controlled.

As a prestigious OEM, we maintain a sound relationship with our main material suppliers, such as Cummins, Perkins, Deutz,  Mitsubishi,MTU, Doosan, Stamford, Leroy Somer, Mecc Alte, Deepsea, ComAp, etc. Strongly focused on innovation and technical service, Mecca Power has been successfully used in hundreds of projects, widely applied in buildings, constructions, Telecom, data centers, power plant, etc., covering over 90 countries in Asia, Africa, Oceania, Europe, Middle East and America.

Product Description

500kw-2000kw Mitsubishi/SME diesel generator with Stamford/Leroy Somer  Alternator

 

Specification

Powered by  SME                                                                                         50HZ    220V-440V     688-2500KVA
Model	LTP		PRP		Engine		Fuel Cons.L/H	Cyl.	Disp.	Gov.
	KVA / KW		KVA/KW		Model	Origin	100%		L
MC688MS	688	550	625	500	S6R2-PTA-C	CN	139	6L	30.0	E
MC825MS	825	660	750	600	S6R2-PTAA-C	CN	170	6L	30.0	E
MC1375MS	1375	1100	1250	1000	S12R-PTA-C	CN	266	12V	49.0	E
MC1540MS	1540	1232	1400	1120	S12R-PTA2-C	CN	281	12V	49.0	E
MC1650MS	1650	1320	1500	1200	S12R-PTAA2-C	CN	308	12V	49.0	E
MC1915MS	1915	1532	1750	1400	S16R-PTA-C	CN	310	16V	65.4	E
MC2100MS	2100	1680	1875	1500	S16R-PTA2-C	CN	418	16V	65.4	E
MC2250MS	2250	1800	2050	1640	S16R-PTAA2-C	CN	432	16V	65.4	E
MC2500MS	2500	2000	2250	1800	S16R2-PTAW-C	CN	476	16V	79.9	E

Powered by  Mitsubishi                                                                                 50HZ    220V-440V     688-2500KVA
Model	LTP		PRP		Engine		Fuel Cons.L/H	Cyl.	Disp.	Gov.
	KVA / KW		KVA/KW		Model	Origin	100%		L
MC825MT	825	660	750	600	S6R2-PTAA	JP	170	6L	30.0	E
MC880MT	880	704	800	640	S12A2-PTA	JP	174	12V	33.9	E
MC1100MT	1100	880	1000	800	S12H-PTA	JP	220	12V	37.1	E
MC1400MT	1400	1120	1250	1000	S12R-PTA	JP	266	12V	49.0	E
MC1540MT	1540	1232	1400	1120	S12R-PTA2	JP	281	12V	49.0	E
MC1650MT	1650	1320	1500	1200	S12R-PTAA2	JP	308	12V	49.0	E
MC1915MT	1915	1532	1750	1400	S16R-PTA	JP	310	16V	65.4	E
MC2100MT	2100	1680	1875	1500	S16R-PTA2	JP	418	16V	65.4	E
MC2250MT	2250	1800	2050	1640	S16R-PTAA2	JP	432	16V	65.4	E
MC2500MT	2500	2000	2250	1800	S16R2-PTAW	JP	476	16V	79.9	E
MC2750MT	2750	2200	2500	2000	S16R2-PTAW-E	JP	528	16V	79.9	E

Genset Workshop

FAQ

1.Q: What is your MOQ of this item?
A:1 Set

2.Q: What are your payment terms?
A:30% TT as deposit,70% TT before Shipment or 100% LC at sight

3.Q:What's the warranty time of diesel generators?
A:Global Warranty: 12months after delivery or 1000 running hours, whichever come first.

4.Q:Can you accept the customized products?
A:Yes, of course.We accept your specific order if you can provide us your special requirements or special samples

5.Q:What's the delivery time ?
A:20 to 35 days after receiving your payment in advance.

6.Q:Do you offer OEM service?
A: Yes

7.Q:What is the power range do you have?
A:Mecca Power assemble genset from 2 to 4000kva

8.Q:What's your special compare to other manufacturer?
A:We can delivery genset 1000units/month as engine and alternator OEM and Strategic partners. Especially for big quantity and big power projects, we support not only by solutions and tender documents, but also by fast delivery time and good price.


-----------------------------------------------------------------------------------------------MAITAINENCE---------------------------------------------------------------------------------------------

General Troubleshooting            

This section lists the generating set for some common fault, the reasons for the failure and determines the            
method of fault. General operators can determine their own fault and note, maintenance it according to the            
brochure. But please contact the repairing agents when meeting a special note or not listed failure of operation.            
Please remember the following suggestions before repairing:            
- Make sure that study the failure carefully before any operation.            
- Repair with the easiest way and most commonly used method.            
- Find the exact causes of failure and completely solve the fault.      
     
1. Generator Sets            
Description of this section is for reference only. If the following failure occurs please contact the repairing agents.            
(Some models of control panel installed only parts of the following warning indicator light)

Icon	Indicator Light	Reason	Fault Analysis
Low oil pressure alarm	Low oil pressure alarm	When oil pressure does not reduce normally, the light is on.	-General because of a lack of oil or lubrication system failure caused by (refueling or replacing the oil filter) -When occurs this fault should automatically shutdown generator sets immediately.
High water temperature alarm	High water temperature alarm	When the water temperature has risen to a level higher than or equal to the sensor setting, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Low fuel level alarm	Low fuel level alarm	When a fuel level has been detected by the sensor fitted to the daily tank, the light is on.	-General because of a lack of water or oil shortage, or overload. -When occurs this fault should automatically shutdown generator sets immediately.
Battery charger fault alarm	Battery charger fault alarm	If the charging system has fault, when engine running, the light is off.	-Battery charging system fault caused. -The light is on at the initial start, when the charger reaches a certain speed, the light is off. -This failure will not lead to automatic shutdown generating units.
Crank failure alarm	Crank failure alarm	When the generator set failed three times (or six times) in a row starting, the light is on.	-Oil supply system or re-start the system failure caused.
Overload or breaker tripping alarm	Overload or breaker tripping alarm	When overloading or Short circuit, the light is on. Tripping circuit breakers cause generator set load out.	-In this fault, it need to load or unload some parts to eliminate short-circuit, and then re-close the circuit breaker.

Introduction of Maintenance grade(Interval) for the generator set 
A Level Maintenance Interval (Daily Maintenance)
1. Check Daily Report of Genset .
2. Check fuel level and coolant level. 
3. Check alternator for cracks or other damage, and the condition of the belts must be checked, flab or 
other damage.
4. Check the Air filter. The air filter should be replaced when necessary .
5. Release fuel tank and fuel filter's water and sediment.
6. Check the water cooling filter.
7. Check starting battery and electrolyte, add electrolyte when necessary. 
8. Check the starter, check noisy defect.
9. Use air syringe cleaner to clean the water tank, coolant system and cooled fin net.
B Level Maintenance Interval (Less than 400 hours)
1. Repeatedly check A Level Daily Maintenance steps.
2. After operating 100 to 250 hours, replace the fuel filter. All the fuel filters should not be cleaned, it 
should be replaced. 100 to 250 hours is just flexible time, actually it must be according to the practice 
and real fact. 
3. After operating 200 to 250 hours, replace the oil & oil filter. All the lube oil must fit up to the CF 
Grade of American Petroleum Institute.
4. After operating 300 to 400 hours, replace the air filter. The air filter can be cleaned with air syringe, or 
it can be replaced. The replacement must be according to the environment and real fact.
5. Replace the cooling system and add coolant concentration.
6. Clean the crankshaft and inlet, outlet air- filter net. 
C Level Maintenance Interval (2000-3000 hours), Please do as follows:
1. Repeatedly check A and B Level Daily Maintenance steps.
2. Remove the tap of valve, clean and wash oil dirt and sludge.
3. Fasten snails from each part (including running parts and fixed parts)
4. Clean and wash the crankcase, oil sludge, steel scraps and sediment with engine.
5. Check wearing of the engine turbo, clean and wash accumulation of carbon, adjust it when necessary.
6. Check and adjust valve clearance.
7. Check PT pump, quality of injection, adjust injection process, adjust it when necessary.
8. Check and adjust the tension of fan belt and water pump belt, adjust and replace it when necessary; 
clean and wash water tank radiator fins, then check the using capability of thermostat.
Current Repair (D Level Maintenance)(3000-4000 hours)
1. Check valve, valve seat and other wearing, repair or change it when necessary.
2. Check P pump, quality of injection, repair and adjust it when necessary.
3. Check and adjust connecting rod and fastening twisting torque.
4. Check and adjust valve clearance.
5. Check the trip of injector.
6. Check and adjust tension of fan and generating belt.
7. Clean and wash accumulation of carbon in inlet pipes.
8. Clean and wash the core of air cooler.
9. Clean and wash the whole oil lubrication system.
10. Clean and wash room of rocker arm, oil sludge in the sump and Metal scrap-iron.
Medium Repair (6000-8000 hours)
1. Including the items of minor repair.
2. Disassemble generator(except crankshaft)
3. Check the easy worn spare parts in pitman shaft system, gas distribution system, lubrication system, 
cooling system of cylinder, Piston, Intake and exhaust valve, replace them when necessary.
4. Check fuel supplying system, adjust oil pump and injector.
5. Repair and test the alternator, clean oil-sediment and lubricate the bearing of alternator.
Overhaul (9000-15000hours)
1. Including the items of intermediate repair.
2. Disassemble all the parts in the generator.
3. Replace cylinder, piston, piston loop, big and small bearing bushes, trusting pad of crankshaft, intake 
and exhaust valve, a whole set of tools for generator repair 
4. Adjust oil pump, injector and replace pump core, injector
5. Replace a whole set of repair tools for turbo charger and a repair set for water pump.
6. Adjust the parts of connecting rod, crankshaft and generator body,repair or replace them when necessary